Tuesday, 25 June 2019

Guide: How To Use A PS3 Controller On PC

I think you may get a new PS3 controller, probably it’s your first one. That’s great. Since you’re reading this article, you must be looking for a guide to use a PS3 controller on your Windows PC. You’re on the right place. The top easy but true guide here to help you connect your PS3 controller with Windows.

Let’s get started.


 Use Ps3 Controller On Pc

Use Ps3 Controller On Pc

To sync up the controller, we are effectively trying to fool Windows 10 into thinking it is, in fact, an Xbox controller. To do this, we’ll need specific drivers.

To begin, download and install the following drivers: Microsoft DirectX runtime, Microsoft Visual C++ 2010 Redistributable Package, Microsoft .NET Framework 4.5, Microsoft Visual C++ 2013 runtime, and Xbox 360 controller driver (only if you’re running anything other than Windows 10).

Alternatively, plug the smaller end of the USB cable into the back of the PlayStation 3 controller, then connect the other, standard, end to an available USB port on the PC. Windows will then trigger a number of driver downloads.

However, depending on your version of Windows it may not download them all causing issues further down the line. That’s why we recommend downloading them manually to be sure.

Install ScpToolkit

  • Connect the DualShock 3 controller to the PC via the mini-USB capable and turn it on by pressing the PlayStation button in the center of the controller. Then download the latest version of ScpToolkit, the open source software that allows the controller to communicate with Windows.
  • Install ScpToolkit (you may need to extract it beforehand via Windows 10’s inbuilt extractor tool) from the “ScToolkit_Setup.exe” installer that resembles a PlayStation 3 controller.

how-to-connect-ps3-controller-to-pc-363x450 (1)

  • During the installation process, choose the file location as desired, then when prompted to select the features to install, click “Install” without changing any of the presets apart from checking that the “ScpToolkit Bluetooth Pair Utility” under “Legacy Components” is ticked off. You may be prompted to install “Prerequisites”, do so as instructed.
  • Once installed, you’ll be prompted to “Run Driver Installer”, do so by clicking on the large green play icon in the middle of the window. The next page lists all the available drivers. 
  • Tick off ”Install Bluetooth driver” and ”Install DualShock 3 driver”, making sure to untick ”Install DualShock 4 driver”.How To Use Ps3 Controller On Pc
  • To the right, click on “Choose Bluetooth dongles to install” and select your device, be it a Bluetooth dongle or your motherboard’s inbuilt Bluetooth feature (it may need to be enabled if it doesn’t show up). 
  • Next, under “Choose DualShock 3 controllers to install” select the one marked “PLAYSTATION(R)3 Controller (VIDL xxxx, PID: xxxx)’’, ‘’x’’ being a random assortment of numbers of letters unique to your device.

Tap the ‘’Install’’ button on the right-hand side, and ScpToolkit will run through your choices, then install and configure the necessary drivers.

At it proceeds, alerts should pop up on the right-hand of your screen. Run through these to ensure the installations were successful. ScpToolkit will chime when finished, and you can tap ‘’Exit’’ on the right-hand side, below the ‘’Install’’ button used previously.

Success and Bluetooth

At this point, the PlayStation 3 controller is installed and usable as a plug-and-play device. Note that the system tray now includes the ScpToolkit icon signaling the tool is on and working away. Unless specified otherwise, ScpToolkit will automatically boot up each time Windows starts up.

You can also unplug the controller to use it wirelessly. Windows will sync it via Bluetooth within a few seconds and confirm the process has worked via a popup.

Whenever you restart the PC, you’ll need to connect the controller via USB, allow ScpToolkit do its magic, then be able to unplug and use it wirelessly when the light on the controller itself turns on.

Tinkering Options

Connect Ps3 Controller To Pc

ScpToolkit allows the user to tinker with quite a few of the options and customize the PlayStation 3 controller quite widely. Here’s how to access the options.

Click on the Windows start menu and find ‘ScpToolkit Settings Manager’, click on it to launch the tool. This menu is used to fine-tune some of the features of the tool such as turning off sound alerts, adjust the controller latency and sensitivity, determine the ”Dead-zone threshold”, flip the axes, turn off the vibration feature and so on.

Finally, because we are tricking Windows 10 into using Xbox 360 controller drivers, the PlayStation 3 controller will behave identically to an Xbox 360 controller.

What this means is that the button control scheme won’t register in some games. In other words, hitting X may not equate to hitting X at all.

Fortunately, most games allow you to customize controls and assign specific buttons as desired. If this fails, find the ‘’ScpToolkit Profile Manager’’ from the Windows Start menu. This menu allows you to create custom mapping profiles where you can assign specific functions to buttons as required.

Finding the right mapping can involve some trial and error if games are being temperamental, so persevere, and it shouldn’t be too difficult to figure out what works best.


Ps3 Controller Windows 10

Depending on your settings, Windows 10 may deny the installation of the DualShock 3 controller drivers as a security measure.

The majority of the DualShock 3 drivers are what we call unsigned drivers, i.e., they don’t have the vetting of an authorized developer or company required for installation. If "Driver Signature Enforcement" is turned on, the drivers won’t install properly.

To circumvent this problem, you’ll need to switch off "Driver Signature Enforcement". Before we proceed, note that this isn’t an ideal solution as it potentially makes your machine vulnerable. As a word of caution, we would recommend using a DualShock 4 or an Xbox controller if the problem surfaces.

  1. Click on "Settings” in the Windows Start menu.
  2. In "Settings”, navigate to ”Update and Security”, and finally click on ”Recovery” in the left-hand menu. Note the "Restart Now” button under "Advanced startup”, and click it to proceed.
  3. Once the PC has restarted, you’ll have access to "Startup Settings". Hit ‘’F7’’ on your keyboard to trigger the ”Disable driver signature enforcement” line. Hit enter to reboot Windows as usual.
  4. Follow the steps outlined above to install the drivers and sync up the PlayStation 3 controller.

The Final Word

That’s pretty much all there is to it. Load up your favorite game, tweak the settings, and enjoy!


  1. revisit UltraTech4Youit again

    lovely This article is an appealing wealth of useful informative that is interesting and well-written.

    Thanks for sharing a lovely information with us. It will help us lot

    informationJobs Near MEEhard work

    Thanks for sharing a lovely informationwith us. It will help us lot

    Thanks for sharing a lovely GroupLinkswith us. It will help us lot